Posts Tagged ‘copper’

Posted by admin at April 27, 2020

Category: portable

Tags: , , , , , , ,

2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Wel
2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Wel
2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Wel
2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Wel
2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Wel
2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Wel

2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Wel
2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Welding Torch Oxygen Torch Gas welding Equipment. (1) Re-ignition after safety inspection The firing performance must be checked before using the torch. The method of inspection is to fasten the oxygen hose to the oxygen fitting. After turning on the oxygen, first turn on the acetylene adjustment handwheel, then turn on the oxygen adjustment handwheel, then press the finger on the acetylene joint. If you feel a suction, it indicates that the suction performance is normal. If there is no suction, even if the oxygen flows back from the acetylene joint, it means that the suction performance is not normal and must be repaired, otherwise it is strictly prohibited. If the suction performance is normal, check for leaks. The inspection method is as follows: connect the acetylene hose to the acetylene joint, immerse the torch in a clean water tank, or apply soapy water to each joint of the welding torch, gas valve, then open the adjusting handwheel, and send oxygen and acetylene. Gas, if there is a tight place, you will find bubbles. (2) Ignition After the above inspection is passed, the torch can be ignited. Ignition has two methods: first open acetylene and first open oxygen. In order to ensure safety, it is best to first open acetylene, immediately turn on oxygen after ignition and adjust the flame. When the high-power torch is ignited, a friction igniter or other special ignition device should be used. Connect the large oxygen bottle (oxygen source) and small oxygen bottle with the original oxygen bridge of this product, and fasten the nut; 2. First turn off the low pressure knob of the small oxygen bottle and open the high voltage switch of the small oxygen bottle; 3. Slowly open the switch of the large oxygen cylinder. When the air is blown, there is a slight sound of the wire. When the sound disappears, it indicates that the pressure of the two bottles is balanced and the oxygen is completed. Turn off the switch of the large oxygen cylinder and the small oxygen cylinder, and lower the oxygen bridge; Note: The oxygen source pressure should not be higher than the working pressure of the small oxygen bottle; the temperature of the small oxygen bottle will increase slightly when oxygen is taken, which is a normal physical phenomenon! Five, gas bottle gas: Butane gas flushing method: After shaking the butane gas cylinder, insert the special gas-filling interface of butane gas vertically, and the pointer shows that the butane gas cylinder can be directly dialed after the flushing; Note: The gas bottle is used for the first time. Because there is air in the bottle, after the gas is flushed, the gas bottle is placed upright, the switch is opened to release the internal air, and the gas is flushed in! The operator must hold the welder operation certificate issued by the national labor department, and the undocumented operation produces adverse consequences, and is responsible for it! The oxygen cylinder is inspected once every three years, and the gas cylinder is inspected once a year, and the full-time inspection unit at the location of the user is responsible for inspection; 3, gas bottles, oxygen bottles should be kept away from fire sources, avoid high temperature sunshine, the surrounding temperature should not exceed 50 degrees Celsius; it is strictly prohibited to use hard objects, heavy objects to knock, hit oxygen cylinders and gas bottles, avoid heat storage, be careful! The gas cylinder inflation amount shall not exceed 1/2 of the gas cylinder volume; 5. The oxygen in the oxygen cylinder cannot be completely used up. The residual pressure of 0.5Mpa must be retained! The failure of the oxygen meter must be repaired and replaced by a professional, and others must not disassemble it! Gas bottles and oxygen cylinders must not be mixed with other gases. Do not contaminate oil! 8, welding torch, dry fire fire extinguisher and other related main parts, must carefully check the function and performance before each use. If you violate the above matters, you will be conceited at your own risk! Note: The oxygen source pressure should not be higher than the working pressure of the small oxygen bottle; the temperature of the small oxygen bottle will increase slightly when oxygen is taken, which is a normal physical phenomenon! (Except some countries and APO/FPO) 2. The images shown are not the actual item and are for your reference only. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. Accessories come with a 3-month. You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED. You agree to all of the above-listed policies upon ordering on Aliexpress! You have 7 days to and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A OR. There are NO EXCEPTIONS! OR, you may choose to have a. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. The item “2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Wel” is in sale since Tuesday, April 14, 2020. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Tools\Refrigeration Tubing Tools”. The seller is “best.price.2019″ and is located in San Jose, CA. This item can be shipped worldwide.
  • Color: Does not apply
  • Manufacturer: Does Not Apply
  • Model: Does Not Apply
  • Brand: Does Not Apply
  • UPC: 313020098033
  • EAN: Does Not Apply
  • MPN: Does Not Apply
  • Type: Welding Torch
  • Model Number: PHY101
  • Welding Type: Acetylene Torch

2L Portable Torch Set Refrigeration Repair Tool Air Conditioning Copper Tube Wel

Posted by admin at April 21, 2020

Category: conditioning

Tags: , , , , , , ,

Air Conditioning Refrigeration Copper Elbow R22 R410a 90 45 Degree Long Radius

Air Conditioning Refrigeration Copper Elbow R22 R410a 90 45 Degree Long Radius
Central Components is a proud division of Stareast International P/L. HVAC+R TOOLS & EQUIPMENT. GENERAL APPLIANCE SPARE PARTS. OUR Product Code: COPPER BELOW SERIES. HIGH QUALITY HIGH END AIR CONDITIONING REFRIGERATION COPPER ELBOW – R22 R410A WALL THICKNESS WITH EITHER 45 DEGREE, 90 DEGREE OR 90 DEGREE LONG RADIUS TYPE ELBOWS. Choose required combination from the drop down list. Please note in the drop down menu, the 90 DEGREE long radius elbows only have r410a thickness in stock, they can also do the R22. Please ask us as many questions you require answers to before purchasing this item including whether it is suitable for your application. KNOWN ALTERNATIVE PART NUMBERS, APPLICATIONS & SUITED MODELS. TERMS & CONDITIONS (STANDARD CONDITIONS OF SALE). The item “AIR CONDITIONING REFRIGERATION COPPER ELBOW R22 R410A 90 45 DEGREE LONG RADIUS” is in sale since Friday, October 7, 2016. This item is in the category “Home & Garden\Building Materials & DIY\Plumbing & Fixtures\Other”. The seller is “cc_parts_equipment” and is located in Padstow SYDNEY NSW. This item can be shipped worldwide.
  • Brand: SEI COMPONENTS
  • MPN: AIR CON INSTALLTION COPPER ELBOW

Air Conditioning Refrigeration Copper Elbow R22 R410a 90 45 Degree Long Radius

Posted by admin at April 8, 2020

Category: bend

Tags: , , , ,

Posted by admin at January 26, 2020

Category: hydraulic

Tags: , , , , , , ,

ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration
ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration
ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration

ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration
ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration. Both clips on box all ok. The item “ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration” is in sale since Tuesday, January 21, 2020. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pipe Tools\Pipe Benders”. The seller is “jpe.123″ and is located in Chichester. This item can be shipped to United Kingdom.
  • Brand: Unbranded
  • Power Source: Hydraulic
  • Pipe/Tube Size: 2 in (51 mm)

ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration

Posted by admin at January 9, 2020

Category: conditioning

Tags: , , , , , ,

AIR CONDITIONING & REFRIGERATION COPPER ELBOW 1.1/8 90o 28.6MM R22 RF357 50 PACK

AIR CONDITIONING & REFRIGERATION COPPER ELBOW 1.1/8 90o 28.6MM R22 RF357 50 PACK
Central Components is a proud division of Stareast International P/L. HVAC+R TOOLS & EQUIPMENT. GENERAL APPLIANCE SPARE PARTS. OUR Product Code: RF357. AIR CONDITIONING & REFRIGERATION COPPER ELBOW 1.1/8 90o 28.6MM R22 RATED RF357 -50 PACK. TERMS & CONDITIONS (STANDARD CONDITIONS OF SALE). The item “AIR CONDITIONING & REFRIGERATION COPPER ELBOW 1.1/8 90o 28.6MM R22 RF357 50 PACK” is in sale since Friday, January 27, 2017. This item is in the category “Home Appliances\Washers & Dryers\Washer & Dryer Parts”. The seller is “cc_parts_equipment” and is located in Bankstown, NSW . This item can be shipped worldwide.
  • Brand: SEI COMPONENTS
  • Model: RF357
  • MPN: RF357 -004

AIR CONDITIONING & REFRIGERATION COPPER ELBOW 1.1/8 90o 28.6MM R22 RF357 50 PACK

Posted by admin at January 6, 2020

Category: hydraulic

Tags: , , , , , , ,

ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration
ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration

ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration
Geberit Mepla Novopress Hydraulic Pipe Bender 16-22-28-32mm. Used in working conditions. Javac HB-85 hydraulic tube bender with aluminium body, stainless steel pump with double hydraulic circuit, adjustable pump lever reach and formers for 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″ and 7/8 soft drawn copper tube. Supplied in a hard carry case. In working order and in used condition. The item “ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration” is in sale since Saturday, December 21, 2019. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pipe Tools\Pipe Benders”. The seller is “joby_uk” and is located in Ashford. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay.
  • Brand: Geberit Mepla
  • Power Source: Hydraulic
  • Pipe/Tube Size: 2 in (51 mm)

ITE Hydraulic Copper Pipe Tube Crossbow Bender Air Conditioning Refrigeration

Posted by admin at November 14, 2019

Category: refrigeration

Tags: , , , , ,

Box of 7 Refrigeration & Air Conditioning Copper Tube 15 mtr Coils 3/8 x0.032
Box of 7 Refrigeration & Air Conditioning Copper Tube 15 mtr Coils 3/8 x0.032
Box of 7 Refrigeration & Air Conditioning Copper Tube 15 mtr Coils 3/8 x0.032
Box of 7 Refrigeration & Air Conditioning Copper Tube 15 mtr Coils 3/8 x0.032

Box of 7 Refrigeration & Air Conditioning Copper Tube 15 mtr Coils 3/8 x0.032
REFRIGERATION & AIR CONDITIONING. 3/8″ X 0.032″ X 15 MTR. Refrigeration quality copper tube in 15 meter coils. British quality copper tube for air conditioning and refrigeration. & manufactured by Lawton Tube. The item “Box of 7 Refrigeration & Air Conditioning Copper Tube 15 mtr Coils 3/8 x0.032″ is in sale since Tuesday, September 10, 2019. This item is in the category “Business, Office & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Parts/Accessories\Other HVAC & Refrigeration Parts/Accessories”. The seller is “greengatecarparts” and is located in Manchester. This item can be shipped to United Kingdom.
  • MPN: Does Not Apply
  • Brand: LAWTON

Box of 7 Refrigeration & Air Conditioning Copper Tube 15 mtr Coils 3/8 x0.032

Posted by admin at November 8, 2019

Category: copper

Tags: , , , , ,

3S NEW COPPER PIPE AIR CONDITIONING PRE INSULATED 1/4 COIL 50 mt REFRIGERATION
3S NEW COPPER PIPE AIR CONDITIONING PRE INSULATED 1/4 COIL 50 mt REFRIGERATION
3S NEW COPPER PIPE AIR CONDITIONING PRE INSULATED 1/4 COIL 50 mt REFRIGERATION

3S NEW COPPER PIPE AIR CONDITIONING PRE INSULATED 1/4 COIL 50 mt REFRIGERATION
1/4 – 6.35mm Pre-insulated copper PIPES for A/C & REFRIGERATION. Foamed polyethylene INSULATION for piping. AND DO NOT HAVE CONNECTING NUTS. CU-DHP 99.9 EN 12735-1 regulation Tube diameter: 1/4 – 6.35mm Tube thickness: 0.8 mm Roll length: 50 meters insulation Material: polyethylene foam (LDPE) Insulation thickness: 6 mm Color: White Self-extinguishing: class 1 Operating temperature: -80 ° C to +98 ° C. ALL for air conditoning. A/C FLUSHING & CLEANING. È un marchio gestito da Samà s. So Promessi Sposi, 23 B, 23900 Lecco tel. The item “3S NEW COPPER PIPE AIR CONDITIONING PRE INSULATED 1/4 COIL 50 mt REFRIGERATION” is in sale since Thursday, February 27, 2014. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “supersamastore” and is located in Lecco, LC. This item can be shipped to all countries in Europe.
  • MPN: CI.TR1/4
  • Brand: ISOCLIMA

3S NEW COPPER PIPE AIR CONDITIONING PRE INSULATED 1/4 COIL 50 mt REFRIGERATION

Posted by admin at November 2, 2019

Category: ecoair

Tags: , , , , , ,

Ecoair Air Conditioning 10M Refrigerant Copper Pipes 5/8 & 3/8 Lagged + Nuts

Ecoair Air Conditioning 10M Refrigerant Copper Pipes 5/8 & 3/8 Lagged + Nuts
AIR CONDITIONING – 10 metre connecting. P re-insulated copper pipes 5/8″(16.0mm) & 3/8″(9.53mm). Don’t lag the pipes yourself! Let us lag it for you. Ten 10 metre connecting pre-insulated copper pipes assembly for liquid side and gas side. You will get: Pair of 5 metres Copper Pipes, sizes 5/8″ and 3/8″ pre insulated Pre-flared ends with connecting nuts Piping tapes External wall hole cover Suitable for models: ECO2401SN – Split air conditioners 24000 BTU ECO2402S – Split air conditioners 24000 BTU ECO2802S – Split air conditioners 28000 BTU. Check with your Air Conditioning Units Specification. View our split air conditioning units. FIXED SPEED AIR CONDITIONING. All return requests be in writing within 14 days from the date of receiving the product(s). Vat is included in the price. UK offshore courier – Additional charge. Please call for quote. Cheques / Postal Order We accept personal cheques and postal order. Goods will be dispatched upon clearance. We accept credit cards over the telephone. The item “Ecoair Air Conditioning 10M Refrigerant Copper Pipes 5/8 & 3/8 Lagged + Nuts” is in sale since Wednesday, March 17, 2010. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “ecoair” and is located in LONDON. This item can be shipped to United Kingdom, Ireland.
  • MPN: COPPER3-10M
  • Brand: EcoAir
  • Type: Air Conditioning Parts
  • Sub-Type: Easy Fit Air Conditioning Copper Pipe Kit
  • Power (W): Less than 1000W

Ecoair Air Conditioning 10M Refrigerant Copper Pipes 5/8 & 3/8 Lagged + Nuts

Posted by admin at November 1, 2019

Category: flared

Tags: , , , , , , , ,

Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS
Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS
Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS
Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS
Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS
Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS
Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS
Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS

Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS
For air conditioning / refrigeration. Length: 1 – 25 m. Options: pre-flared / without flare nuts. Compliant with common refrigerants like R410A, R407C, R32. Fulfils the European Pressure Equipment Directive. Bends easily without kinking. Polyolefin-copolymer textured coating provides good resistance to UV radiation. Closed cell insulation prevents condensation. Color of the foam: light gray. Color of the protective film: white. Insulation thickness – 9mm. Pipe thickness: 0,8mm. Copper pipes – diameters. 1/4 – 6,35mm. 3/8 – 9,52mm. 1/2 – 12,70mm. Temperature: -50 ° C. Sets are sent in sections from 1 meter to 25 meters. We also cut to your chosen size on request. We offer two types of tubes. B Plain, without flare nuts. You can find suitable brass fittings. IBAN: DE 82 8505 0100 0232 0452 32 BIC (SWIFT): WELADED1GRL. The item “Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS” is in sale since Thursday, June 1, 2017. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Air Conditioners & Heaters\Central Air Conditioners”. The seller is “systerm_eu” and is located in Warszawa, MAZOWIECKIE. This item can be shipped to European Union member countries.
  • MPN: TUBOLIT Split
  • Unit Type: m
  • Room: Any Room
  • Brand: Armacell
  • Type: Air Conditioning Parts

Flared Copper Coil Tube Air Conditioning Refrigeration with or witho FLARE NUTS